Company Information
Contact Us
Model 1200S Semi-Automatic Bag/Case Palletizer


•AB programmable controller standard
•AB Panelview HMI
•Electromechanical and Pneumatic operating devices (no hydraulics)
•Heavy duty structural and tubular steel construction
•Heavy duty wire mesh Empty Pallet Conveyor
•Counterweighted pallet lift with “Z” chain support
•Layer compression on each layer for maximum load stability
•Layer squaring and compacting plates contain all
4 sides of layer during layer strip cycle
•Layout flexibility-system designed to your space requirements                                                                
•Low and easy maintenance
•Minimum layer drop from stripper plates to pallet (1” standard)
•Palletizer flexibility pallet size, pallet construction, load heights, etc.
•Split, two directional layer stripping action
•Field convertible to Model 1200A or 1800A Automatic Palletizer
•Highest quality components utilized throughout

Technical Data

Air requirements: 10 cubic feet per minute at 80 PSI, 65 SCFM
Approximate shipping weight 10,000 pounds
Electrical Service 30 amps, 460/3/60
Maximum layer size: 54” x 48”
Maximum pallet size: 54” x 48”
Maximum sustained rate: up to 20 bags per minute in a 5 bag pattern (depending on
operator dexterity)
Maximum load height: up to 100” including pallet
Maximum load weight: 5,000 pounds
Standard Pallet Magazine capacity: 20

Optional Equipment

Automatic Slip Sheet Dispenser
Automatic Film Top Sheet Dispenser
Cardboard Top Sheet Dispenser
Automatic Tiesheet Dispenser
Air Table Stripper Plates

Sequence of Operation

Bags/Cases enter receiving plate properly spaced from bag pacing conveyor.

Operator must rotate and position bags/cases as required for each pattern.

Operator presses two palm push buttons and layer squaring plates extend from each side to contain the layer on all sides during the layer stripping cycle, insuring square, definable edges on all sides of the palletized unit.

Each layer is compressed against the underside of the stripper plates as the next layer is being formed for a firm, stable load.

When pre-set number of layers is reached, the filled pallet is gently lowered and ejected from the Palletizer onto the Full Pallet Accumulation Conveyor.

Simultaneously, an empty pallet is dispensed from the pallet magazine, and conveyed into the pallet lift and raised to accept the first layer of bags.

Company Information
Contact Us
Control Design & Manufacturing, Inc. Home
©2004 Control Design & Manufacturing, Inc.